Field Master™
MS2080A
The MS2080A builds on Anritsu’s pioneering history of developing reliable and dependable instruments for the world’s most demanding RF measurements in the toughest environments. Weighing less than 9 pounds (4 kg), the MS2080A is small, compact, and easy to carry.
When hunting for interfering RF signals in the field, MS2080A offers a wide range of features to identify and locate the source. A fast sweep speed of 45 GHz/s coupled with AM/FM demod and RF source geolocation help pinpoint the position of interfering signals fast. The optional real-time spectrum analyzer captures even the shortest of bursted or TDD signals and the addition of the S331P Site Master enables cable and antenna line sweep measurements on the same instrument.
LTE and 5G base station measurement options support operators and contractors perform the essential measurements when installing or optimizing the network.
For use on the bench, the hard case with rubberized easy grip bumpers and integrated kick stａnd makes the MS2080A an ideal instrument for general purpose lab measurements where portability and space are at a premium.
- Spectrum Analyzer
- Real-Time Spectrum Analyzer (RTSA)
- Interference Analyzer
- True Power Meter
- Cable and Antenna Analyzer
- AM/FM modulation quality measurements
- LTE FDD/TDD Analyzer
- 5GNR FR1 Analyzer
- Coverage Mapping
- Built-in PDF/HTML report generation
- Interference Hunting
- 5G - 5G, 4G and 3G Testing with Anritsu
- 基站測試
- Coverage and Interference Mapping
- C-bａnd Deployment and Testing
- LTE
- Interference hunting and spectrum clearing – fast sweep speeds a low distortion front-end and the Real Time spectrum analyzer combine to quickly identify interfering signals. A special interference finder option adds AM/FM demodulation with audio output plus interfering source triangulation on a digital map to pinpoint and identify the location and source of interference.
- Broadcast transmitter analysis – a comprehensive range of transmitter measurements – including: AM/FM modulation quality measurements, harmonic, spurious, occupied bandwidth, channel power, and adjacent channel power – ensures conformity to regulatory requirement
- 5GNR base station measurement – validate the performance of the gNB base station with essential measurements that are in full compliance with 3GPP TS 38.104 V15, including:
- frequency error
- time offset
- cell/sector ID
- SSB: RSRP, RSRQ, SINR, RSSI
- modulation quality EVM
- unwanted emissions
- occupied bandwidth
- adjacent channel leakage ratio
- transmitter harmonics and spurious
- EIRP
- 5G/LTE coverage mapping – receive a clear representation of the signal strength of 5G/LTE transmitters over intended geographic area by continuously measuring RF data – including RSRP, RSRQ, SINR, channel power – with results graphically displayed on a digital map or building floor plan.
- Cable and Antenna measurements – Line sweep RF cables and antennas at base station locations with accessory S331P Site Master
| Frequency range | 9 kHz to 4 GHz (Option 704)
9 kHz to 6 GHz (Option 706) |
| Sweep speed | 45 GHz/s |
| Phase noise | -95 dBc/Hz @ 1 GHz freq and 100 kHz offset |
| DANL | < -165 dBm (with pre amp) |
| Maximum input signal | +30 dBm |
| Dynamic range | >105 dB minimum at 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW |
| Amplitude range | DANL to +30 dBm |
| Input damage level | 5 Watts |
| Frequency accuracy | Aging: ±1.0 x 10–6 per 10 years
Accuracy: ±0.28 x 10–6 (-10 °C ± 55°C) plus aging |
| Amplitude accuracy | ±1 dB (± 0.5 dB typical) |
| Resolution bandwidth in sweep mode | 1 Hz to 5 MHz |
| Resolution bandwidth in zero span | 10 Hz to 20 MHz |
| RTSA bandwidth | 40 MHz |
| Demodulation | 5GNR base station, LTE base station, AM/FM modulation quality |
