JSH0402潤滑油泡沫特性試驗器

一、符合GB/T12579、ISO6247標準

二、主要技術參數

控溫方式：數顯溫控儀自動控溫

空氣流量：94±5mL/min

計時方式：數顯計時器計時

控制溫度：24±0.5℃（低溫浴）

93.5±0.5℃（高溫浴）

水浴容積：高、低溫浴為φ300×460（mm）

工作電源：AC220V±10％ 50HZ

整機功率：3.5KW

三、性能及特點

1、采用進口數顯溫控儀控溫，控溫精度高，使用壽命長，低溫浴能控制到24±0.5℃，高溫浴能控制到93.5±0.5℃；

2、采用數顯計時器計時，計時準確，顯示直觀；

3、配有投入式致冷儀，致冷頭伸入低溫浴內，在水溫高于24℃時，通過致冷保證低溫浴溫度仍能控制在24±0.5℃。

JSH0402 lubricating oil foam characteristic tester

I. Comply with GB/T12579, ISO6247 standards

Ii. Main technical parameters

Temperature control mode: Digital display temperature controller automatically controls temperature

Air flow: 94±5mL/min

Timing: Digital display timer timing

Control temperature: 24±0.5℃ (low temperature bath)

93.5±0.5℃ (high temperature bath)

Water bath volume: high and low temperature baths of 300×460 (mm)

Power supply: AC220V± 10% 50HZ

Machine power: 3.5KW

Iii. Performance and Characteristics

1. Imported digital temperature controller is used for temperature control, with high precision and long service life. Low temperature bath can be controlled to 24±0.5℃ and high temperature bath to 93.5±0.5℃;

2. Use digital display timer for timing, accurate timing and intuitive display;

3. Equipped with an inputting refrigeration apparatus, the cooling head is extended into the low-temperature bath. When the water temperature is higher than 24℃, the cryogenic bath temperature can still be controlled at 24±0.5℃ by refrigeration.