模切部：
◆模切輥好鋼材，壁厚 30mm，平衡校正，鍍硬鉻；
◆墻板為好鑄鐵材質，壁厚50MM，大型加工中心制作；
◆軟輥自動修磨 機構提高膠套重復使用率，可修磨3-4次；
◆線速度自動補償確保每一批紙箱模切尺寸一致；
◆進口 聚氨酯軟切膠套，安裝方便，橫切1200萬次；
◆機械式軟輥左右橫向移動40MM，膠墊磨損均勻；
◆六級 精磨齒輪采用40cr材質，噪音低，使用壽命長；
◆模切輥汽缸自動分離裝置，減少膠套磨損。
送紙部
◆采用的前緣送紙系統，送紙精度高、速度快、送紙輪壽命長，送紙實現1000張/ 小時，精度±0.5mm；
◆風機風量可以任意調整，可滿足送紙風量的要求；
◆相位采用微電 腦控制，可360度相位任意調整，快捷準確；
◆前擋板手動調整，側擋板電腦調整；
◆導紙輥有槽膠 面，防止破壞紙板強度，增加送紙的準確性；
◆推紙器、滑塊為硬質鋁合金材質，質輕耐磨；
◆后擋 箱、推紙板電動調整，可實現數字設備、調整準確、方便。
電腦部：
◆采用plc程序控 制，保護功能完善，控制可靠性高；
◆lcd觸摸屏實現人機對話操作方便直觀；
◆主機采用變頻調速節省 電能，提速平穩；
◆整機由光、電、氣聯合控制體系。
Feeding Department:
♦ Adopt the world's most advanced leading-edge feed system, feeding
precision is high, speed and long life round feed, feeding the achievement
of 10.OOOpcs/hour. accuracy ±0.5mm;
♦ Blower air volume can be adjusted to meet the feed airflow requirements;
♦ The use of microcomputer control phase can be adjusted 3600 phase,
faster and more accurate;
♦ Manual adjustments before the tailgate, side baffle to adjust the computer;
♦ Paper roll guide groove plastic surface has, the strength of cardboard to
prevent damage and increase the accuracy of feeding.
♦ Pushing paper, and the slider for rigid aluminum alloy material, lightweight
wear-resistant.
♦ After the block box, push the cardboard electric adjustment, digital
equipment can be achieved, the adjustment is accurate, convenient.
Die Cutting Department:
♦ Die-cutting roller for the high quality steel materials, 30mm
thickness,balance correction, hard-chrome plating.
♦ Wallboard for high-quality cast iron material, 50mm thickness , and
large processing center production
♦ Soft-roll automatic grinding institutions to pouches repeat usage,
grinding 3-4 times.
♦ Line speed automatic compensation to ensure that each batch of
cardboard boxes full of die-size line
♦ Juan Zhi cut imports of soft pouches, ease of installation, the
die-,
♦ Mechanical soft roll about 40 mm lateral movement, the pads wear
uniform.
♦ 40cr material the use of grinding gears for 6, low noise, long life.
♦ Die-cutting roller cylinder automatic separation devices to reduce wear pouches.
Computer Department:
♦ Adopt of PLC control, improve the protection, control and high reliability;
♦ LCD touch screen is easy to operate to achieve an intuitive man-machine dialogue;
♦ Frequency host used to save power, smooth acceleration;
♦ Machine by light, electricity, gas joint control system.
