性能特色：
適用范圍：
技術參數：
1．主機傳動部分：采用AC馬達搭配變頻器作為切卷材料傳動，加減速穩定快速。
2．控制單元：使用可程序控制，同軸中可設定多種尺寸自動轉換切割。
3．操作面板部分：操作接口采用LCD觸控屏10寸，可直接在屏幕上設定各種切卷條件及運轉狀況。
4．電機控制系統：控制系統為PLC可程式控制器，同軸中可設定多種尺寸，電腦于切割時自動調整切割寬度。
5．切卷定位系統：使用日、歐洲系列品牌伺服馬達控制，高精度滾珠螺杄進行尺寸定位及使用線性滑軌承載刀座。定位動作精確平順。
6．進刀定位系統：使用日、歐洲系列品牌伺服馬達控制進刀方式，可擬人化做三段式速度進刀切卷。提高效率并得到品質。
7．圓刀角度調整：使用日、歐洲系列品牌伺服馬達計算圓刀角度轉向，因應不同材料做不同角度變化（角度調整范圍8°）當切割平面不佳時，可直接變換切割角度。可減少換刀次數，提高生產效率。
1. main drive part: AC motor and frequency converter are used to drive the material, and acceleration and deceleration are stable and fast
2. central control unit: programmable central control, which can automatically convert and cut various sizes in the coaxial line.
3. operation panel part: the operation interface adopts LCD touch screen 10 inches, and can directly set various cutting conditions and operation conditions on the screen.
4, motor control system: the central control system is a PLC programmable controller, and a variety of sizes can be set in the coaxial computer, and the computer automatically adjusts the cutting width when cutting.
5, cutting and positioning system: the use of Japanese, European series brａnd servo motor control, high precision ball screw for size positioning and use of linear slide bearing cutter seat. The positioning movement is accurate and smooth
6. feed positioning system: using the European and European brａnd servo motor to control the feed way, it can be humanized to do three stage speed feed cutting Improve efficiency and get the best quality.
7. round knife angle adjustment: use Japanese, European series brａnd servo motor to calculate round knife angle steering, because different materials do different angle change(angle adjustment range+8 degree), when the cutting plane is not good, the cutting angle can be changed directly. It can
reduce the number of changing the knife and improve the production efficiency.適用范圍：
適用于BOPP／PVC／PE／透明膠帶／美紋紙／雙面膠帶／牛皮紙膠帶等之分切。
It is suitable for BOPP/PVC/PE/transparent tape/textured paper/ double-sided tape / kraft paper The tapes are cut and cut.技術參數：
| 機器寬度 | Machine Width | 1.3M 1.6M |
| 切割精度 | Cutting Precision | ±0.1mm |
| 切卷直徑 | Max.Cutting O.D | 500mm |
| 切割管芯外徑 | Cutting Core O.D | 1"-3" |
| 最小切卷寬度 | Min.Cutting Width | 1mm |
| 圓刀直徑 | Diameter of Circular Blade | Φ250Φ300Φ350 Φ450Φ500Φ600 |
