ProSoft Technology的以太網/IP™到西門子工業以太網通信網關允許在羅克韋爾自動化pac和西門子S7 pac之間進行高速雙向數據傳輸。兩個獨立的以太網端口允許每個協議駐留在單獨的子網中，允許您在兩個子網之間傳遞數據，而無需更改每個設備的IP地址。
此外，該網關還包括一個嵌入式EDS附加配置文件，可以簡化集成并縮短調試時間。

?兩個獨立的以太網端口允許每個協議駐留在單獨的子網中。這允許您在兩個子網之間傳遞數據，而無需將每個設備的IP地址更改為同一子網。
?數據優先級:多個I/O連接允許您為狀態和/或控制數據設置rpi。
?包括一個嵌入式EDS附加配置文件，允許簡化集成和減少調試時間。
?網關包含一個SD卡插槽(SD卡可選)，用于存儲配置文件。這可以用于災難恢復。
?通過模塊開關進行安全模塊配置(v1.04及更高版本)。
?多達10,000個16位寄存器可用于交換大量數據。

ProSoft Technology’s EtherNet/IP™ to Siemens® Industrial Ethernet communication gateway allows high-speed bi-directional data transfers between Rockwell Automation® PACs and Siemens® S7 PACs. Two separate Ethernet ports allow each protocol to reside on separate subnets, allowing you to pass data between the two subnets without changing each device’s IP address.
In addition, the gateway includes an embedded EDS Add-On Profile, allowing for simplified integration and reduced commissioning time.

? Two separate Ethernet ports allow each protocol to reside on separate subnets. This allows you to pass data between the two subnets without changing each device’s IP address to be on the same subnet.
? Data prioritization: Multiple I/O connections allow you to set RPIs for status and/or control data.
? Includes an embedded EDS Add-On Profile, allowing for simplified integration and reduced commissioning time.
? Gateway includes a SD card slot (SD card optional) for storing configuration files. This can be used for disaster recovery.
? Secure module configuration via module switch (v1.04 and greater).
? Up to 10,000 16-bit registers can be used to exchange large amounts of data.